Beechcraft Door Post Mounted Inertial Reel STC KitAdd to Wishlist
**PLEASE NOTE: Based on your model and color choice, there may be a delay in receiving your order due to manufacturing restrictions. If your order will be affected by this delay, you will be notified by email and information will be provided as to when you can expect your order to ship. If you have any questions, please contact us.**
STC SA01880CH EASA 10071581
Door Post Mounted Inertial Reel
This kit is installed using the same parts as our Beechcraft 3RS-114FS Fixed Strap STC Kit. The difference between this kit and our other Inertial Reel Kit (3RS-114IR) is the mounting location. The 3RS-114IR mounts down near the floor behind the seats and comes up through a D-Ring. This one mounts up on the door post.
FAA approved STC / PMA kit for the installation of 3 Point Diagonal (Single Strap Over) inertial reel equipped shoulder harnesses in the 2 front seats (pilot and co-pilot) of an aircraft that did not come with factory installed shoulder harnesses.
Our Beechcraft Inertial Reel STC Kit includes all of the required FAA PMA parts and hardware to create the shoulder harness attachment points in the pilot and co-pilot positions as well as TSO-C114 OEM quality AmSafe® 3-point diagonal belt assemblies.
You Will Receive;
- 2 (two) single diagonal shoulder harnesses with inertial reels - pilot and co-pilot position
- 2 (two) inertial reel covers*
- 2 (two) lap belts with new buckle and end fittings - pilot and co-pilot position
- All required parts & hardware for 2 front seats
- Detailed installation manual with drawings
- 8130-3 airworthiness certificate
- Supplemental Type Certificate
- STC Authorization
Estimated Installation Time: 4 - 8 hours to complete both the pilot & co-pilot restraints after everything is open and ready to begin the installation of the STC Kit. This is an estimated time only; we cannot guarantee a time due to the differences between installers &/or shops.
**This installation does require a hole (1) through the outer skin of the aircraft at each doorpost. Please see the photos - you can see a black "dot". That is 1/2" in diameter and the kit includes a plug that is paintable to match the exterior of your aircraft if so desired. That is the ONLY indication on of this installation showing on the outside of the aircraft. Installation photos are linked below.
*The inertial reel cover is black, but is made of a material that can be painted to match the interior of your aircraft if so desired.