Beech 3RS-114FS Fixed Strap Shoulder Harness Kit - STC SA01880CH

Add to Wishlist
Current Stock:
Sold As: 1 Kit / 2 Front Seats - Pilot and Co-Pilot
STC SA01880CH Approved Single Engine Models: 35, 35R, A35, B35, C35, D35, E35, F35, G35, H35, J35, K35, M35, N35, P35, S35, V35, V35A, V35B, 36, A36, 35-33, 35-A33, 35-B33, 35-C33, 35-C33A, E33, E33A, E33C, F33, F33A, F33C, G33
STC SA01880CH Approved Multi Engine Models: 95, 95-55, 95-A55, 95-B55, 95-B55A, 95-B55B, 95-C55, 95-C55A, B95, B95A, D95A, D55, D55A, E55, E55A, E95, A56TC, 58, 58A
Stock colors: Black, Cruiser Grey and Fawn
Special order colors: No refunds or returns. Allow 4 weeks for delivery.
Color None Selected *


FAA approved STC / PMA kit for the installation of 3 Point Diagonal (Single Strap Over) fixed strap (manually adjustable) shoulder harnesses in the 2 front seats (pilot and co-pilot) of an aircraft that did not come with factory  installed shoulder harnesses.

Our Beechcraft Fixed Strap STC Kit includes all of the required FAA PMA parts and hardware to create the shoulder harness attachment points in the pilot and co-pilot positions as well as TSO-C114 OEM quality AmSafe® 3-point diagonal belt assemblies.

You Will Receive;

  • 2 (two) single strap diagonal shoulder harnesses - pilot and co-pilot position
  • 2 (two) lap belts with new buckle and end fittings - pilot and co-pilot position
  • All required parts & hardware for 2 front seats
  • Detailed installation manual with drawings
  • 8130-3 airworthiness certificate
  • Supplemental Type Certificate
  • STC Authorization
STC Kits are stocked with belts in Black, Grey or Fawn. Over 50 different colors are available by Special Order at no additional cost. Please allow 4 weeks for shipment of special order colors.  Please Note: We cannot accept returns or provide refunds on special orders.
** Please Note ** This installation does require a hole (1) through the outer skin of the aircraft at each doorpost.  Please see the photos - you can see a black "dot".  That is 1/2" in diameter and the kit  includes a plug that is paintable to match the exterior of your aircraft if so desired. That is the ONLY indication on of this installation showing on the outside of the aircraft.  Installation photos are linked below.
For aircraft that came with factory installed 3-point diagonal shoulder harnesses or optional attachment points we have replacement 3-point restraints. Please see Replacement Restraints. If you are replacing restraints that were originally installed using this STC kit, please see Alpha Aviation STC ReplacementsThe full kit is not needed again.