Cessna C100-114FS Fixed Strap Shoulder Harness Kit - STC SA02211CH EASA 10070260 Cessna C100-114FS Fixed Strap Shoulder Harness Kit - STC SA02211CH EASA 10070260
Cessna C100-114FS Fixed Strap Shoulder Harness Kit - STC SA02211CH EASA 10070260 Cessna C100-114FS Fixed Strap Shoulder Harness Kit - STC SA02211CH EASA 10070260
$1,580.00

Cessna 100 Series Fixed Strap STC Kit

Add to Wishlist

Create Wishlist

Current Stock:
Sold As: 1 Kit / 2 Front Seats - Pilot and Co-Pilot
STC SA02211CH / EASA 10070260 Approved Models: 170, 170A, 170B, 172, 172A, 172B, 172C, 172D, 172E, 172F, 172G, 172H, 172I, 172K, 175, 175A, 175B, 175C, P172D
STC SA0211CH / EASA 10070260 Approved Models: 180, 180A, 180B, 180C, 180D, 180E, 180F, 180G, 180H, 182, 182A, 182B, 182C, 182D, 182E, 182F, 182G, 182H, 182J, 182K, 182L, 182M, 182N, 182P
STC SA0211CH / EASA 10070260 Approved Models: 185, 185A, 185B, 185C, 185D, 185E, 185F, 185G, 185H
Estimated Installation Time: 2 - 3 Hours to install the kit & restraints
Availability: Standard fit in Black, Cruiser Gray, and Fawn. Special order colors produced on demand.
Return Policy: Custom orders are non-refundable and non-returnable
Non-Stock Colors: Please allow 10-12 weeks for shipment
Color None Selected *

STC SA02211CH / EASA 10070260

FAA- PMA and EASA approved STC kit for the installation of 3 Point Diagonal (Single Strap Over) Fixed Strap shoulder harnesses in the 2 front seats (pilot and co-pilot) of an aircraft that did not come with factory installed shoulder harnesses.

Our Cessna 100 Series Fixed Strap STC Kit includes all of the required FAA - PMA parts and hardware to create the shoulder harness attachment points in the pilot and co-pilot positions as well as TSO-C114 OEM quality AmSafe® 3-point diagonal belt assemblies.

You Will Receive;

  • 2 (two) single diagonal fixed strap (manually adjustable) shoulder harnesses - pilot and co-pilot position
  • 2 (two) lap belts with new buckle and end fittings - pilot and co-pilot position
  • All required hardware for 2 front seats
  • Detailed installation manual with drawings
  • 8130-3 airworthiness certificate
  • Supplemental Type Certificate
  • STC Authorization
STC Kits are stocked with belts in Black, Grey or Fawn. Over 50 different colors are available by Special Order at no additional cost.
 
Please Note: We cannot accept returns or provide refunds on special orders.
 

Estimated Installation Time: 2 - 3 hours to complete both the pilot & co-pilot restraints after everything is open and ready to begin the installation of the STC Kit.  This is an estimated time only; we cannot guarantee a time due to the differences between installers &/or shops.

 
For aircraft that came with factory installed 3-point diagonal shoulder harnesses or optional attachment points we have replacement 3-point restraints. Please see Replacement Restraints. If you are replacing restraints that were originally installed using this STC kit, please contact us.  The full kit is not needed again.
 
STC Installation Manual
Special Order Colors

Related Products