Cessna Flat Wing jack pad for aircraft that do not have provisions for jack points that
attach to the aircraft. Some of these models include the Cessna 120, 140, 150, 152, 170,
172, 175, 177, 180, 182, 185, 188, 190, 195, 205, 206, 207, 208, 210, 336, and 337.

The pad can also be used in other lifting and supporting operations.

The jack pads should be used in accordance with the Cessna Service Manual for your
aircraft. Those instructions are found in section 2 (Jacking and Leveling) of any Cessna
Service Manual. Generally, the pads would be placed against the main spar just
outboard of the lift strut attach point.

The pads are steel with a ¾ inch steel ball jack point welded to the plate and a dense ¼
inch thick rubber pad on the top face of the pad to conform to and grip the airplane.

TECHNICAL SPECS

• Applicable Models Include the Cessna 120, 140, 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190, 195, 205, 206, 207, 208, 210, 336, and 337.
• For use on Cessna aircraft that do not have provisions for jack points that attach to the aircraft. 
• 3/4" Steel Ball Jack Point Welded to the Plate
• 1/4" Rubber padded
• Follow aircraft service manual instructions for jacking
• Sold in Pairs
• Made in the USA