FAA/TSO-C114 OEM quality AmSafe Inc® replacement restraint for aircraft with existing 3-point diagonal factory installed shoulder harness.
You will receive 1 (one) complete restraint assembly for 1 (one) seat - Pilot or Co-Pilot;
- 1 Shoulder harness with inertial reel.
- 1 lap belt with new buckle and end fittings
- 8130-3 airworthiness certificate
- Certificate of Conformance
This replacement is for a Single Bolt Reel installation.
For those models with a 4 BOLT REEL mounted under the window; We do not have a reel that has that same footprint. An overlay using 2 ply of 40/1000 aluminum (or 71/1000) will need to be created to retain the same mounting location using the single bolt reel, or our PA28/32 STC Kit will be required to create a new attachment point, abandoning the installation location under the window. Please contact us for additional information.
This restraint mounts on the outboard sides near the door post/window and WILL NOT WORK with a cabin center, center console, ceiling mount or overhead style installation.
If you are replacing belts that were installed using our Inertial Reel STC Kit, please see contact us for the correct part number.
Over 50 different colors are available by Special Order. There is no extra charge for non-stock colors. Please allow 10-12 weeks for shipment of special order colors.
Please Note: We cannot accept returns or provide refunds on special orders. Stock colors are subject to at 15% restocking fee and must be received in re-saleable condition with the correct paperwork.