STC SA04389CH

FAA approved STC kit for the installation of nut plates and TSO-C114 3-Point Diagonal (Single Strap) Inertial Reel shoulder harnesses in the 2 front seats (pilot and co-pilot) of a Cessna 150, 150A, B, C, D, E, F, G, H, J, K, L and M and Cessna 152 model that did not come with factory installed attachment points and shoulder harnesses, does not have room at the existing mounting points to accommodate an inertial reel, or an aircraft that currently has nut-plates mounted directly overhead for dual over the shoulder harnesses.

Our Cessna 150 Inertial Reel STC Kit includes all of the required hardware to add the nut-plates to create the shoulder harness attachment points in the pilot and co-pilot positions as well as TSO-C114 OEM quality AmSafe® 3-point Diagonal Single Strap Inertial Reel assemblies.

You Will Receive;

• 2 (two) single diagonal Inertial Reel Equipped shoulder harnesses
• 2 (two) lap belts with new buckle and end fittings
  
• All required hardware for 2 front seats
  
• Detailed installation manual with drawings
• 8130-3 airworthiness certificate
• Certificate of Conformance
• Supplemental Type Certificate
• STC Authorization

Estimated Installation Time: 3 - 4 hours to complete both the pilot & co-pilot restraints after everything is open and ready to begin the installation of the STC Kit.  This is an estimated time only; we cannot guarantee a time due to the differences between installers &/or shops.