Mooney M20 Rear Fixed Strap Replacement - Push ButtonAdd to Wishlist
**PLEASE NOTE: Based on your model and color choice, there may be a delay in receiving your order due to manufacturing restrictions. If your order will be affected by this delay, you will be notified by email and information will be provided as to when you can expect your order to ship. If you have any questions, please contact us.**
FAA/TSO-C114 OEM quality AmSafe® 3-Point Diagonal (Single Strap Over) shoulder harness replacement for Mooney M20 aircraft with factory installed rear seat shoulder harnesses.
You will receive 1 (one) complete restraint assembly for 1 (one) seat;
- 1 fixed strap (manually adjustable) shoulder harness (single strap/diagonal over the shoulder)
- 1 lap belt with 1 hook/quick release and 1 bolt on end fitting
- 8130-3 airworthiness certificate
HOOK / QUICK RELEASE / CLIP END FITTINGS or BOLT-ON END FITTINGS? (there is an image with descriptions in the photos)
Mooney originally used hook/quick release/clip style end fittings. There were reports of a cotter pin rubbing and causing damage to the upholstery. Models that have hook/quick release/clip end fittings can install the bolt-on end fittings by removing the bolt the hook goes around, slipping the end fitting over the bolt and then securing it back into place.
PLEASE NOTE: We Do Not Recommend 3-point Restraints With A Lift Lever Release For Aircraft With Manual Gear. The lift lever buckle can inadvertently be released which will disconnect the lap belt sections. Is the push button mechanism as solid as a lift lever buckle? They are both tested to very high standards and holds as well as the traditional buckle.
Over 50 different colors are available by Special Order at no additional cost. Please allow 4 weeks for delivery. Please Note: We cannot accept returns or provide refunds on Special Orders or Special Order Colors.
MOONEY M20F (and a few C's): Some of the Mooney's have a panel that restricts access to the door post making it basically impossible to add shoulder harnesses using our Minor Change Kit. We know it's been done, but we do not know the procedure being used.