Beechcraft Inertial Reel STC Kit
FAA approved STC / PMA kit for the installation of 3 Point Diagonal (Single Strap Over) inertial reel equipped shoulder harnesses in the 2 front seats (pilot and co-pilot) of an aircraft that did not come with factory installed shoulder harnesses.
Our Beechcraft Inertial Reel STC Kit includes all of the required FAA PMA parts and hardware to create the shoulder harness attachment points in the pilot and co-pilot positions as well as TSO-C114 OEM quality AmSafe® 3-point diagonal belt assemblies.
You Will Receive;
- 2 (two) single diagonal shoulder harnesses with inertial reels - pilot and co-pilot position
- 2 (two) inertial reel covers*
- 2 (two) lap belts with new buckle and end fittings - pilot and co-pilot position
- All required parts & hardware for 2 front seats
- Detailed installation manual with drawings
- 8130-3 airworthiness certificate
- Supplemental Type Certificate
- STC Authorization
** Please Note ** This installation does require a hole (1) through the outer skin of the aircraft at each doorpost. Please see the photos - you can see a black "dot". That is 1/2" in diameter and the kit includes a plug that is paintable to match the exterior of your aircraft if so desired. That is the ONLY indication on of this installation showing on the outside of the aircraft. Installation photos are linked below.
For aircraft that came with factory installed 3-point diagonal shoulder harnesses or optional attachment points we have replacement 3-point restraints. Please see Replacement Restraints. If you are replacing restraints that were originally installed using this STC kit, please see Alpha Aviation STC Replacements. The full kit is not needed again.
*The inertial reel cover is black, but is made of a material that can be painted to match the interior of your aircraft if so desired.